Skip to main content
Fig. 1 | 3D Printing in Medicine

Fig. 1

From: Imaging properties of 3D printed breast phantoms for lesion localization and Core needle biopsy training

Fig. 1

3D printed Breast Phantoms. Phantoms were printed in VeroClear (a), TangoPlus (b) and a new combination of TissueMatrix with a coating of VeroClear at 600 μm (c). Ultrasound (US) image (d) of the TangoPlus phantom demonstrates lack of sound penetration. Images obtained with standoff pad (e) shows similar findings. Both VeroClear and TissueMatrix phantoms had similar results on US imaging

Back to article page

3D Printing in Medicine

ISSN: 2365-6271

Contact us