Table 1 The main print settings for the PLA, PVA and Verbatim Primalloy filaments
From: Low-cost FDM 3D-printed modular electrospray/electrospinning setup for biomedical applications
PLA filament print settings | |
|---|---|
 Print temperature | 210 °C |
 Build plate temperature | 60 °C |
 Print speed | 20 mm/s |
 Layer height | 0.15 mm |
 Infill | 20% |
 Build Plate Adhesion | Brim, 3 mm |
 Prime Tower Size | 10 mm |
PVA filament print settings | |
 Printing Temperature | 213 °C |
 Flow | 120% |
 Print Speed | 20 mm/s |
Verbatim Primalloy filament print settings | |
 Printing Temperature | 230 °C |
 Build plate temperature | 60 °C |
 Print Speed | 20 mm/s |